EJACULATING LUKE (@lukebigdicked) - REAL CAST DILDO

MANDRILLO SAYS: “This young Italian guy (@lukebigdicked) has every reason to call himself "blessed", check the measurements and you will understand why. It took a long time to complete this toy but the final result of this real cast is perfect, smooth texture with all details visible”.

EJACULATING SYSTEM: The ejaculating system consists of a channel inside the toy. It is not a tube inserted into the toy but a channel obtained during the making of the toy. This feature makes cleaning much easier and safer. Toy comes with 1 sterile, non-toxic 100ml (3.4oz) syringe and 120cm (47in) food grade PVC or food grade silicone tubing (depending on availability).

ASSEMBLY (toy - tube - syringe): Insert the tube into the toy from the side of the base about 7 or 10 cm (3 or 4 inches), to do this you can use some water-based lubricant. Do this action gently, without forcing the silicone too much and making small rotations of the outer tube as you insert it. Insert the cone of the syringe into the other end of the tube.

MATERIALS: The platinum cure silicone used in the making of this product is of the best possible quality, made in the United States of America. It is skin-safe, phthalate-free, 100% vegan, and has not been tested on animals. Also the silicone used in the coloration process is platinum cure silicone. Both, silicone and pigments used are skin safe.

HARDNESS: Dual-density option make the toy more realistic firmness wise, the exterior layer will be in medium-soft silicone, shore 00-30, and for the core will be used harder silicone, shore A10, but the toy will still conserve flexibility. This combination make in my opinion the best option possible. Medium-soft option is the other option if you don’t want dual-density hardness. The toy with this option will be made all in shore 00-30 silicone. Will be softer and bit more squishy but still will keep the shape, it will not be limp. Glans and scrotum will be in 00-30 silicone in both case, dual-density or medium-soft option. Softer or harder silicone might be available at request, contact me before your purchase, I will reply as soon as possible.

ACCESSORIES: Check the accessories page to add some extra to your toy.

SIZES: Look at the reference picture. The measurements are as accurate as possible but are still approximative. The reference can is 330 ml, it is 14.5 cm / 5.7 inches high and the diameter is 5.8 cm / 2.3 inches. This model of soda can is the most recent and is called Sleek Cans. Send me a message for any question regarding the measurements.

COLOR: Realistic colors are made with various shades of colors and with the techniques used in creating special effects. For custom colors or special requests such as pigments or fluorescent color please contact me. I do my best to keep the color as close as possible to the reference color but consider that screen and camera setting might change perception of colors. Are the colors lasting? It's not easy to answer this question, so I'll use an example to simplify. I bought a nice designer shirt before the summer. I've used it several times and obviously put it in the washing machine several times. After two months and a dozen washes, the color is no longer what it used to be, it has faded and the fabric is less soft than when it was new. If I had left it in my closet all summer without using it, the color would still be perfect. I do my best to ensure that the color of my products is long lasting and I recommend that you follow the instructions to keep it as long as possible but consider that the use of any product (a smartphone, a car, a dress, a pair of shoes) irreparably creates wear and tear on the product itself.

LUBRICANT: To make the product more realistic to the touch, lubricants can be used. The most suitable lubricants are water-based ones because they are safer and easier to clean. Be careful of silicone based lubricant, oil based lubricant, lotions, greases and oils (body lotions, baby oil, lubricated condom), some of them could interfere with the silicone or the colors and damage them.

CLEANING: The high quality material allows for thorough washing and disinfection, there are different methods:
— it can be washed by hand using warm water an antibacterial soap, this is the simplest and safer method.
— the product can be immersed in water at 80° / 100° C (212° / 176° F) from 5 to 10 minutes. Do not put the toy directly into the pot, boil the water then pour it into a suitable container with the toy inside.
— it can be soaked in water and a suitable disinfectant solution.
DO NOT TO USE ABRASIVE MATERIALS LIKE SPONGES OR CLOTH.
Drying is also important, let your toy air dry or place it on a radiator. If you want to dry it by hand use a cotton cloth or clean kitchen paper. DO NOT RUB the toy but pat it to dry. Before being packaged, each product is washed with soap or antibacterial solution and might be sprinkled with talcum powder or pharmaceutical grade rice starch. Wash it again before first use. We recommend to wash and dry your product before and after each use and before storing it. DO NOT USE ABRASIVE MATERIALS.

EJACULATING SYSTEM CLEANING: During the design of this system I have taken into consideration the cleaning that must be able to be carried out with simplicity and accuracy. In the inner channel of the toy there are no glued parts and all components can be separated and reassembled. The syringe and tube can be cleaned without much difficulty and eventually replaced with new ones when needed. To clean the channel, the normal toy cleaning routine applies. The best thing is to let water flow (from the base towards the glans) inside then insert a disinfectant solution, let it act and rinse. It is also possible to use a cylindrical brush or a smooth rod to rub the inside of the toy, for example a rigid plastic straw. It is necessary to do this action gently in order not to damage the toy, especially in the glans area. It is advisable to use a suitable soap or detergent to clean and also to lubricate and avoid too much friction inside the toy.

CARE AND STORAGE: Very few things could harm your new product. Pay special attention to fingernails and sharp, pointed objects. Keep your product clean and dry, wrapped in a clean cotton cloth or non-sealed plastic food bag. Also pay attention to fabrics that can be abrasive if rubbed on the product, damaging the color and the surface. As well be careful of lotions, greases and oils (body lotions, baby oil, lubricated condom), some of them could interfere with the silicone or the colors and damage them.

BEFORE THE SHIPPING: I always check the quality of my products and do not send damaged products. All my products are handmade and handcrafted, for this reason they may have small irregularities or differences in size and color compared to those shown in the photos.

SHIPMENT: The shipment will be made (barring setbacks) within four weeks from the date of the order. The shipping is discreet, the product is well packed inside an anonymous brown cardboard box, it does not have any logo or brand name. The box (mostly) is placed inside a well closed courier envelop. By law I must place the invoice in the outside pocket of the parcel, still the invoice will not be visible from the outside, it is folded and there will be the shipping details paper in front with just a regular address from Italy as sender, and your address. The content of the parcel will be described as "Silicone novelty". Describe the contents of the package is compulsory by law. Even if you marked your order as gift, by law I need to place in the pocket outside the parcel the invoice and descrive the content.

EXCHANGES, RETURNS AND REFUNDS: I accept exchanges, returns and refunds for the cases provided for by the provisions of Legislative Decree no. 206 of 06/09/2005, (Consumer Code). For more information read our general conditions of sale. My products are individually packaged in smooth or embossed plastic bags closed hermetically and with guarantee seals. Having received the purchased product, BEFORE OPENING THE BAG, check its integrity. If you have any problems with the product, please contact me immediately WITHOUT OPENING THE BAG. Once the bag with the seals has been opened, the possibility of returning or exchanging the product is void.

By proceeding with the order and purchase of these products, you declare that you have previously read Terms and conditions and Privacy Policy on the site used to purchase the products.